GPS Rack Mount Splitter 2 x 32 outputs, Dual Antennas - RMS232

The RMS232 allows up to 32 GPS/GNSS synchronization modules and receivers access to the GPS timing signal. It is designed with dual antenna redundancy to keep timing and synchronization modules operating when a GPS antenna or cable fails. An optional dual power supply feature allows two internal power supply units to share the load. If one unit is not available (internally or externally), the other will seamlessly take over without any loss in power*. It is perfect for many wireless applications.

The ability of the splitter to switch antennas allows all connected GPS devices to remain fully functional in the event of an antenna failure, which is so important in a wireless environment. The rackmount is designed to power both antennas at 5VDC.

This rackmount has an internal switch, allowing it to receive and distribute distinct signals from two antennas.  It does not combine the signal from two antennas, which would increase jitter.

GPS Rack Mount Splitters are commonly used by cellular, timing, and test labs utilizing GPS. They are also becoming increasingly popular with small cells, base stations and distributed antenna system (DAS) solutions.

The RMS232 can fit into existing 19 inch rack mount solutions making it easy to install in most infrastructures, however 21" rackmount ear extensions are available for wider installations.

*Choose Dual AC or Dual DC or Dual -48 from drop down list, if two internal power supplies are required.

Key Features

  • 32 GPS/GNSS Output Ports
  • LED Antenna Fault Panel
  • Embedded Antenna Health Sensor
  • Automatic Internal Antenna Port Switch
  • -48VDC Power Supply Option
  • Dual Power Supply Option

Technical Data

RMS232 General Overview
RMS232 Datasheet


Leadtime on this product is 10 business days. Contact Us for leadtime and pricing on quantities over five.