Defense GPS Hangar Repeater Kit

It is all about saving time. If you can save an hour here or there by NOT having to move aircraft out of the hangar, it adds up. The GPS Hangar kit operates by receiving GPS satellite signals with an antenna located outside the hangar and bringing the signal inside or under a covered (GPS denied) space.

GLI-Hangar allows ongoing installation, testing and troubleshooting of aircraft GPS navigation systems inside the hangar. Delays of maintenance due to inclement weather or the placement of other aircraft is eliminated. Maintenance efficiencies can be immediately recognized, as accessibility to work on the GPS navigation becomes more convenient. Personnel and assets can be protected, plus time and fuel can be saved using GLI-Hangar.

Configured with a smart GPS controller, it is continuously self-testing for any problems - detecting open circuits, faulty antennas, inadequate satellite coverage, oscillation, or internal component issues.

System Includes

  • Passive Antenna
  • Active Antenna
  • Swivel & Pole Mount
  • COPRO Surge Protector (optional)
  • 3 ft (.9m) C240 coaxial cable
  • Up to 100 ft (30.48m) C240 coaxial cable

Key Features

  • Precise operator control over output signal level
  • Automatic Gain Control (locked in power level)
  • Oscillation Detection/Mitigation
  • Always On or On/Off Option

Available Options

  • Power Supply AC & DC
  • Filter L1/L2

Kit Information

GLI-HANGAR M1


For customized quotes and help with system design contact us today. We can also answer any questions regarding product pricing, customized options, specifications, or technical support issues.

Note: All recipients and end users of GPS Source Retransmission products are solely responsible for adhering to all current and future Regulatory Policies governing repeater usage within the specific country of operation.  In the United States, an FCC Part V Experimental license is required for all non-US Federal Government and non-US Military applications as defined in the NTIA Manual 8.3.28.   Furthermore, all end users, resellers, and manufacturer representatives both domestically and internationally assume all responsibility and liability for following the rules and regulations associated with procurement, deployment and lawful operation within each respective region and country of use.