FlexPak6
FlexPak6™ Triple-Frequency + L Band GNSS Receiver
The compact FlexPak6 receiver houses our OEM628™ triple-frequency plus L-Band GNSS receiver board. It tracks all current and future GNSS constellations, with a highly configurable interface to ensure positioning and integration needs are met now and into the future.
Features
- L1, L2 and L2C, L5 signal tracking
- RT-2™, ALIGN®, GLIDE®, RAIM and 100 Hz firmware options
- GPS + GLONASS (Galileo and Compass ready), L-Band Tracking
Benefits
- Flexible communication interface broadens deployment options
- Multi-constellation tracking provides higher solution availability and reliability
- Upgradable receiver firmware ensures easy updating to future signals
- 100 Hz measurements for high dynamic applications
- Supported by industry's highest level of customer service
Attributes
System Type
General Info
Constellation
Tracking
Number of Com Ports
Performance |
Accuracy | (RMS) |
| Single Point L1 | 1.5m |
| Single Point L1/L2 | 1.2m |
| SBAS | 0.6m |
| DGPS | 0.4m |
| NovAtel CORRECT™ |
| TERRASTAR-C | 4cm |
| Veripos Apex | 6cm |
| RT-2® | 1cm+1ppm |
Base Station or Rover
Compact and lightweight, the FlexPak6 is well suited for rover applications. With its powerful GNSS engine, onboard NTRIP v1.0 and v2.0 client and server support and enhanced connection options including serial, USB, CAN and Ethernet, the FlexPak6 is also ideal for base station operation.
Flexible Configuration Options for your Application
Proven and innovative NovAtel technology combine to achieve the best in GNSS positioning. NovAtel's industry leading Pulse Aperture Correlator (PAC) multipath mitigation technology is standard and ensures the highest quality measurements and positioning. This technology provides excellent resistance to interference for consistent, accurate and reliable positioning. Configurable options ensure that your positioning and accuracy needs are met at all times.
Variants
| FlexPak6 | |
|---|---|
| Small, lightweight housing for our OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range | |
| Image_Cached | |
System Type | |
| Enclosed | |
General Info | |
| Length (mm) | 147.00 |
| Width/Diameter (mm) | 113.00 |
| Height (mm) | 45.00 |
| Weight (g) | 337.00 |
| Typical Power Consumption (W) | 1.80 |
Constellation | |
| GPS | |
| GLONASS | |
| Galileo | |
| BeiDou | |
Tracking | |
| L-Band | |
| SBAS | |
| QZSS | |
Number of Com Ports | |
| CAN Bus | 1 |
| Ethernet | 1 |
| RS-232 | 2 |
| USB Device | 1 |
| Supports RS-422 (mode pin) | |
Supporting Products
Other product categories which are required with this product to create a complete system.
GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications
Alternate Products
Other similar products which could be used instead of the product, depending on application.
Next generation GNSS Ionospheric Scintillation and TEC Monitor (GISTM) receiver
End of Life Notice: For more information, click here
Small, lightweight housing for our SPAN on OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range
Dual-frequency plus L-Band GNSS/INS receiver board supports GPS, Galileo, GLONASS and Compass. Features our OEMV-2 form factor
End of Life Notice: For more information, click here
Triple-frequency plus L-Band GNSS receiver board supports GPS, Galileo, GLONASS and BeiDou. Features our OEMV-2 form factor
End of Life Notice: For more information, click here
Optional Products
Optional products can be added to a system to add or enhance functionality.
