SATEL Compact-4BT User Guide
Version 1.8
1
SATEL Compact-4BT
Mobile radio modem
transceiver
USER GUIDE
SATEL Compact-4BT User Guide
Version 1.8
2
TABLE OF CONTENTS
TABLE OF CONTENTS ............................................................................................ 2
1 IMPORTANT NOTICE .................................................................................... 4
2 RESTRICTIONS ON USE ................................................................................ 5
3 PRODUCT CONFORMITY .............................................................................. 7
4
WARRANTY AND SAFETY INSTRUCTIONS .................................................... 8
4.1 Handling the battery operated device and safety issues ......................... 8
4.2 Battery disposal and end of life handling ................................................. 9
5 DESCRIPTION OF THE PRODUCT ............................................................... 10
6 USER INTERFACE ........................................................................................ 11
6.1 Data/DC-supply interface ........................................................................ 11
6.2 LED indicators and buttons ...................................................................... 12
6.3 RF interface .............................................................................................. 13
6.4 Modem start up ........................................................................................ 13
6.5 Bluetooth .................................................................................................. 13
6.6 Data transfer via SATEL Compact-4BT ..................................................... 14
6.7 Charging the battery ................................................................................ 14
6.8 Battery capacity ........................................................................................ 15
6.9 Battery maintenance ................................................................................ 15
7 TECHNICAL SPECIFICATIONS ..................................................................... 16
8 MODEM SETTINGS ..................................................................................... 18
8.1 Default settings ........................................................................................ 18
8.2 Configuration ........................................................................................... 20
SATEL Compact-4BT User Guide
Version 1.8
3
8.2.1 Controlling the device with Configuration Manager .............................................. 20
8.2.2 Controlling the device with SaTerm software......................................................... 21
8.2.3 Using a mobile application ................................................................................. 23
9 MECHANICAL DIMENSIONS ...................................................................... 25
10 ACCESSORIES ............................................................................................. 26
10.1 Data cable ................................................................................................ 26
10.2 Mechanical attachments .......................................................................... 27
10.2.1 Rubber cover..................................................................................................... 27
10.2.2 Multipurpose attachment bracket ........................................................................ 28
10.2.3 Clamp attachment ............................................................................................. 29
10.3 Power source ............................................................................................ 30
10.4 Car cigar lighter plug ............................................................................... 30
11 CUSTOMER SUPPORT AND FEEDBACK ...................................................... 31
SATEL Compact-4BT User Guide
Version 1.8
4
1 IMPORTANT NOTICE
All rights to this manual are owned solely by SATEL OY (referred to in this user guide as SATEL).
All rights reserved. The copying of this manual (without the written permission from the owner) by
printing, copying, recording or by any other means, or the full or partial translation of the manual
to any other language, including all programming languages, using any electrical, mechanical,
magnetic, optical, manual or other methods or devices is forbidden.
SATEL reserves the right to change the technical specifications or functions of its products, or to
discontinue the manufacture of any of its products or to discontinue the support of any of its
products, without any written announcement and urges its customers to ensure, that the
information at their disposal is valid.
SATEL software and programs are delivered ”as is”. The manufacturer does not grant any kind of
warranty including guarantees on suitability and applicability to a certain application. Under no
circumstances is the manufacturer or the developer of a program responsible for any possible
damages caused by the use of a program. The names of the programs as well as all copyrights
relating to the programs are the sole property of SATEL. Any transfer, licensing to a third party,
leasing, renting, transportation, copying, editing, translating, modifying into another programming
language or reverse engineering for any intent is forbidden without the written consent of SATEL.
SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED TO BE
USED IN ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED FUNCTION NOR AS
A PART OF ANY OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL
WARRANTY IF THEY ARE USED IN ANY OF THE APPLICATIONS MENTIONED.
Salo, FINLAND 2018
Copyright: 2018 SATEL Oy
No part of this document may be reproduced, transmitted or stored in a retrieval system in any form or by any means without the
prior written permission of SATEL Oy.
SATEL Compact-4BT User Guide
Version 1.8
5
2 RESTRICTIONS ON USE
SATEL Compact-4BT radio modem has been designed to operate on frequency ranges, the exact
use of which differs from one region and/or country to another. The user of a radio modem must
take care that the said device is not operated without the permission of the local authorities on
frequencies other than those specifically reserved and intended for use without a specific permit.
SATEL Compact-4BT (403-473 MHz) is allowed to be used in the following countries, either on
licence free channels or on channels where the operation requires a licence. More detailed
information is available at the local frequency management authority.
Countries*: AT, BE, BG, CY, DK, FI, FR, DE, GR, IE, IT, LU, MT, NL, NO, ES, SE, CH, GB,
CA, CZ, EE, HR, HU, LV, LT, PL, PT, RO, SI, SK, US
* codes of the countries follow the ISO 3166-1-Alpha-2 standard
WARNING! Users of SATEL Compact-4BT radio modems in North America should be aware, that
due to the allocation of the frequency band 406.0 – 406.1 MHz for government use only, the use
of radio modem on this frequency band without a proper permit is strictly forbidden.
WARNING! Users of SATEL Compact-4BT radio modems in Canada should be aware, that
operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device. (RSS Gen section 7.1.5)
Warning – RF Exposure (CP-4BT)
The minimum safe distance however must be always at least 20 cm.
In addition, this device must not be co-located or operating in conjunction with any other amplifier
etc.
Modification warning statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
SATEL Compact-4BT User Guide
Version 1.8
6
Class B digital device statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
SATEL Compact-4BT User Guide
Version 1.8
7
3 PRODUCT CONFORMITY
Hereby, SATEL Oy declares that SATEL Compact-4BT radio modem is in compliance with the
essential requirements (radio performance, electromagnetic compatibility and electrical safety)
and other relevant provisions of Directive 2014/53/EU. Therefore the equipment is labelled with
the CE-marking.
SATEL Compact-4BT User Guide
Version 1.8
8
4 WARRANTY AND SAFETY INSTRUCTIONS
Read these safety instructions carefully before using the product:
o Warranty will be void, if the product is used in any way that is in contradiction with the
instructions given in this manual, or if the radio modem housing has been opened or
tampered with.
o The radio modem is only to be operated at frequencies allocated by local authorities, and
without exceeding the given maximum allowed output power ratings. SATEL and its
distributors are not responsible, if any products manufactured by it are used in unlawful
ways.
o The devices mentioned in this manual are to be used only according to the instructions
described in this manual. Faultless and safe operation of the devices can be guaranteed
only if the transport, storage, operation and handling of the devices is appropriate. This
also applies to the maintenance of the products.
4.1 Handling the battery operated device and safety issues
To maximize the device battery life a certain precautions should be noticed. If the device is left
unused for a long period of time a charging could take place to prevent battery going totally
empty. The best way to realize the battery capacity is that if the battery indicator LED is Red or
the device won’t start normally from the power button. These both conditions indicate that the
battery has ran or is running empty.
The best temperature for storing the device is the normal room temperature, around +20°C.
If the batteries cannot maintain a charge for long periods of time or they charge not normal
way, this may indicate that the battery is defect.
The performance and life expectancy of the battery depends heavily on how the batteries are
used. Misusing the battery operated device may cause the battery to get hot, break or ignite and
cause serious injury. Be sure to follow the safety rules listed below:
Do not place the device in fire or heat the device with any external source.
Do not open or modify the device by any means.
Do not mechanically abuse the device over its limits or otherwise subject it to strong
impacts or shocks.
Do not use the device to any other purpose that it is intended to.
Do not use the device if, while using, charging, or storing the device, the device emits an
unusual smell, leaks or appears abnormal in any other way.
SATEL Compact-4BT User Guide
Version 1.8
9
Do not place the device in ovens, high-pressure containers, microwave or expose it to
high water streams or underwater conditions for long periods.
In the event that the device leaks battery fluids and the fluid gets into one’s eye, do not
rub the eye. Rinse well with water and immediately seek medical care. Do not leave it
untreated as the fluid could cause damage to the eye.
Be sure to follow the rules listed below while charging the device or operate with the external
power supply.
When charging the device either use a specified cable and power source or otherwise
ensure that the charging conditions meet the specifications given in this manual.
Do not attach the device directly to a mains powered AC supply line. This will cause
permanent damage to the device and could lead to an electric shock.
When the device becomes hot, the built- in safety feature is activated preventing the
battery from charging further. If this happens reduce the heat to build up like shutting
down the device during charging or placing the device to a cooler place.
When charging in cold conditions, do not heat up the device to extend its operational
temperature range. Bring the device indoors to charge it.
Do not continue charging the device if it does not recharge within the specified charging
time or the charging gives constant error indications. This might indicate that the battery
is defect or the charging conditions are out of range.
It is recommended to use the power supply YP1240 that can be purchased from SATEL
Oy or from the local SATEL distributor. If other power supplies are used the safety and
performance are not guaranteed.
4.2 Battery disposal and end of life handling
SATEL Compact-4BT battery can withstand hundreds of charge cycles. However, battery has its
range of cycles and then it should be replaced. Do not try to replace the battery by yourself, but
send it to manufacturer for proper handling and battery replacement.
If you decide to dispose the unit, Lithium-Ion batteries are classified as non-hazardous waste but
should be recycled or disposed properly. See your local area laws and recommendations how to
dispose Li-Ion batteries or electronic waste. Many places have a local recycling points where you
can drop off your batteries or electronic devices. Empty the battery completely before leaving it
to a recycling point.
SATEL Compact-4BT User Guide
Version 1.8
10
5 DESCRIPTION OF THE PRODUCT
SATEL Compact-4BT is a UHF radio transceiver modem. It provides a transparent data link with
other SATEL Compact-4BT or SATELLINE-EASy family modems (SATELLINE-EASy, -TR1, -TR3, -
TR4, -R3, -EASy Pro, -4Pro, SATEL Compact-Proof and EASy-Proof). SATEL Compact-4BT can
be interconnected to a data terminal or similar devices by three different transmission standards;
USB, RS-232 or Bluetooth. Data is further transmitted via UHF data modem.
SATEL Compact-4BT contains a circular M12 connector for USB/RS-232 and TNC for UHF radio
modem, Bluetooth antenna is integrated.
SATEL Compact-4BT contains an integrated rechargeable Li-Ion battery pack which maintains the
operation without external supply. Internal battery is not removable or serviceable by the user.
SATEL Compact-4BT is intended to use inside or outside environment and fulfills IP67 ratings
(1meter / 30minutes). See more detailed description on chapter “Technical Specifications”.
Figure 1.0 SATEL Compact-4BT radio data modem
SATEL Compact-4BT User Guide
Version 1.8
11
6 USER INTERFACE
6.1 Data/DC-supply interface
Figure 1.1 M12 circular connector and its pin configuration
PIN
SIGNAL NAME
DIRECTION
DESCRIPTION
1
USB D+
IN/OUT
USB data positive
2, 5, 6
GND
DC supply- and Signal ground
3
TXD
IN
Transmit data (V.24 level)
4
RXD
OUT
Receive data (V.24 level)
7, 8
+V
IN
**Supply voltage, 12-30 V (+/- 10%)
9
USB D-
IN/OUT
USB data negative
10
RTS
IN
Handshake (V.24 level)
11
CTS
OUT
Handshake (V.24 level)
12
+VUSB
IN
USB Supply voltage 5V
** DC input should be used with 3A fuse for protection.
SATEL Compact-4BT User Guide
Version 1.8
12
6.2 LED indicators and buttons
SYMBOL
NAME
DESCRIPTION
Bluetooth
status
All devices can pair and connect
Only ( 10 most recent ) paired devices can connect
Data / Mode
CP-4BT is on
Receives or transmits data over the serial interface
Battery status
(Power supply
connected)
Charging ongoing
Charging complete
Charging error
Battery status
(During
battery
operation)
Battery level is full
Battery level is fair
Battery level is low
Bluetooth
button
Enable / disable Bluetooth
Power button
Power on / off
Figure 1.2 User interface
SATEL Compact-4BT User Guide
Version 1.8
13
6.3 RF interface
The SATEL Compact-4BT has a single TNC female connector with impedance of 50 Ohm.
The output power of the transmitter is adjustable between 100, 200, 500 and 1000 mW. The
greatest allowable power depends on limits set by local authorities, which should not be exceeded
under any circumstances. The output power of the transmitter should be set to the smallest possible
level, which still ensures error free connections under variable conditions. Large output power
levels using short connection distances can, in the worst case, cause disturbances to the overall
operation of the system.
6.4 Modem start up
SATEL Compact-4BT is operated by two push buttons. Operational states are shown with three
LEDs and different LED colours. To turn on CP-4BT push Power button continuously for three
seconds. Battery LED and DATA/Mode LED will illuminate. To turn off SATEL Compact-4BT push
power button continuously for three seconds.
Pushing power button continuously for 10 seconds SATEL Compact-4BT will internally reset.
6.5 Bluetooth
To turn on Bluetooth push Bluetooth button for three seconds. Bluetooth LED starts to blink Blue.
To turn off Bluetooth push Bluetooth button for three seconds. Bluetooth LED will go off.
If Bluetooth was enabled when device was operational Bluetooth will start next time
automatically when device is switched on. If Bluetooth was disabled when device was
operational Bluetooth will remain off during next time device is switched on.
After enabling Bluetooth LED will blink Blue. During this period all devices can find, pair and
connect. After two minutes LED will switch to Red and further on no new devices can pair but (10
most recent) paired devices can connect.
NOTE!
Setting the radio data modem output power level to that which exceeds the regulations set
forth by local authorities is strictly forbidden. The setting and/or using of non-approved power
levels may lead to prosecution. SATEL and its distributors are not responsible for any illegal
use of its radio equipment, and are not responsible in any way of any claims or penalties
arising from the operation of its radio equipment in ways contradictory to local regulations
and/or requirements and/or laws.
SATEL Compact-4BT User Guide
Version 1.8
14
SATEL Compact-4BT is possible to set to a Bluetooth remote mode. Remote mode allow users to
switch on the device remotely only by creating a connection to Bluetooth. To set the device to a
remote mode Bluetooth should be enabled when the device is off by pushing the Bluetooth
button for three seconds.
Notice that Bluetooth uses an internal antenna, so no external antenna is required. Bluetooth
antenna is positioned on a bottom of the device so for the best performance the internal
antenna should not be blocked or screened by metal objects set close to the housing.
6.6 Data transfer via SATEL Compact-4BT
Data can be sent via Bluetooth, USB or RS-232 which are ON simultaneously so no extra setting
is needed to choose which port shall be opened, choosing the data port is done by selecting the
dedicated cable.
If Bluetooth port is used for data transmission USB and RS-232 ports are also operational. User
should not send data to two different ports simultaneously as this might corrupt the data.
All serial ports including Bluetooth do not output or pass through data to other serial ports, all
data input is directed to internal UHF modem.
If Bluetooth data transmission is required Bluetooth must first pair and connect with SATEL
Compact-4BT.
6.7 Charging the battery
SATEL Compact-4BT contains a Li-Ion battery which can be charged from external DC supply.
The device can be operated either battery powered or external DC supply powered. During the
external DC supply internal battery is charged. This influence the power consumption from the
external source up till 2 Amps @ 12V. When external DC supply is connected all power is
drained from that source. After battery is fully charged the external DC supply will continue to
feed the device hence not draining the battery. DC supply can be disconnected at any time or it
can be left connected all times.
When external DC supply is connected Battery LED will illuminate Green or blinking Green when
charging is ongoing.
If during the charging Red LED starts blinking there is an internal error in charging process. Error
can occur in a following circumstances; charging temperature is too low or high, maximum
charging time has exceeded, battery absent or defect. In a case of error occurrence assure that
the device is in a proper temperature range. Notice that inner temperature may be different than
outside, or the device may take a while to cool down or heat up. If charging takes too long or
behaves not normal, battery may be defect. In this case contact manufacturer for further
instructions.
SATEL Compact-4BT User Guide
Version 1.8
15
6.8 Battery capacity
A good practise is to minimise battery consumption during the operation as this can dramatically
extend the operational time. The best way to minimize battery drainage is to use as little Transmit
power as possible. If Transmission distances are short, output power of 100mW could be
adequate. As well the device should be switched off if not in use.
Below are the typical operational times in various conditions.
Condition, +20°C
Operation
Notes
Transmit,
50 % duty cycle,
1 W output
6 hours*
Transmit,
50 % duty cycle,
500 mW output
8 hours*
Receiver
20 hours*
Bluetooth only
>20 days*
discoverable mode
Power off
>1 year*
Charging
4 hours
empty full
Cycle life
>500**
full charge - discharge cycles
* In -20 °Celsius operational times can decrease 40 %.
** Due to the Li-Ion battery technology capacity will slightly decrease after each cycle
effecting directly to the operation times.
6.9 Battery maintenance
Li-Ion battery technology requires some maintenance procedures to optimise its longevity during
use and storage. SATEL Compact-4BT uses its internal battery to some minor functionalities even
if the unit is set to OFF. This means that the battery is constantly drained and will eventually
deep discharge the battery which radically effects its durability. Therefore it is essential to
maintain the battery charge state even if the unit is stored and not used for longer periods. The
simple way to maintain the battery condition is to keep the unit in a room temperature and
periodically charge it fully every 6 months.
SATEL Compact-4BT User Guide
Version 1.8
16
7 TECHNICAL SPECIFICATIONS
SATEL Compact-4BT complies with the following international standards:
o EN 300 113
o EN 300 489 (EMC)
o IEC 60950 (safety)
o CFR47 part90
Values are subject to change without a notice.
RECEIVER
TRANSMITTER
Note!
Frequency Range
403 ... 473 MHz
Tuning range
70 MHz
Minimum RF Frequency
Step
6.25 kHz
Channel Bandwidth
12.5 kHz / 25 kHz
Programmable
Frequency Stability
<1 kHz
Maximum Receiver Input
Power without Damage
+14 dBm
Maximum Receiver Input
Power without
Transmission Errors
-10 dBm
FEC ON
Sensitivity
-112 dBm @ 25 kHz
-116 dBm @12.5 kHz
FEC ON
Blocking
> 86 dB @ 25 kHz
> 88 dB @ 12.5 kHz
FEC ON
Intermodulation
Attenuation
> 61 dB @ 25 kHz
> 61 @ 12.5 kHz
FEC ON
CO-Channel Rejection
> -11 dB @ 25 kHz
> -10 dB @ 12.5 kHz
FEC ON
Adjacent Channel
Selectivity
> 56 dB @ 25 kHz
> 51 dB @ 12.5 kHz
FEC ON
Spurious Rejection
> 67 dB
FEC ON
Typical Power
Consumption
Note 1.
Charging
12 V: 7.4 W
RX-OFF
Charging + RX
12 V: 8.4 W
RX-mode
Charging + TX
12 V: 13.2 W @ 1 W RF
TX-mode, Continuous,
50Ω
Device OFF
12 V: 0.46 W
Not Charging
RX
12 V: 1.32 W
Not Charging
TX
12 V: 5.8 W @ 1 W RF
Transmitter Power
(programmable)
0.1, 0.2, 0.5, 1 W
TX-mode, 50Ω load
Communication Mode
Half-Duplex
Adjacent Channel Power
acc. to EN 300 113
TX-mode
SATEL Compact-4BT User Guide
Version 1.8
17
Transient Adjacent
Channel Power
acc. to EN 300 113
TX-mode
Carrier power stability
< ±1.5 dB
Note 1: Power consumption is measured using an external power source.
DATA MODEM
Note
Electrical Interface
RS-232 / USB
Bluetooth
Bluetooth 2.1 / BLE
Interface Connector
M12 Circular
Data speed of I/O-
interface
9600 – 115200 bps
Data speed of Radio
Interface
4FSK FEC OFF: 19200 bps (25 kHz) 9600 bps (12.5 kHz)
4FSK FEC ON: 14400 bps (25 kHz) 7200 bps (12.5 kHz)
8FSK FEC OFF: 28800 bps (25 kHz) 14400 bps (12.5 kHz)
8FSK FEC ON: 19200 bps (25 kHz) 9600 bps (12.5 kHz)
16FSK FEC ON: 28800 bps (25 kHz) 14400 bps (12.5 kHz)
Data Formats
Asynchronous data
Air Interface Encryption
AES128
Programmable
Modulation
4FSK, 8FSK, 16FSK, GMSK
GENERAL
Note
Operating Voltage
+12 … +30 Vdc +/- 10% Vdc
External DC
supply
Temperature Range
Type approval condition: -25 ... +55 °C.
Battery pack
2S1P, 7.4V 3350 mAh Li-Ion
Charging condition
0 °C ... +45 °C
Temperature
Ranges
-25 °C ... +60 °C
Battery operated
-40 °C ... +85 °C
Operational
-25 °C ... +55 °C
Complies with
standards
-40 °C … +85 C
Storage
Antenna Connector
50 , TNC female
Housing
Shielded / bare PCB inside metal / plastic housing
UHF Antenna
External
Bluetooth antenna
Internal
Size L x W x H
165 mm x 55 mm x 55 mm
overall height
IP rating
IP67
30min / 1meter
Mechanical
Properties
IEC60068-2-32, ISO9022-36-08, ISO9022-31-06,
ISO9022-33-06
Weight
420 g
OTHER MEASURES
Note
ESD-failure
threshold
8 kV contact, 15 kV air discharge
Immunity test
10 V/m
SATEL Compact-4BT User Guide
Version 1.8
18
8 MODEM SETTINGS
8.1 Default settings
The radio modem is delivered with the following default settings (unless otherwise specifically
ordered):
DEFAULT VALUES OF THE ADJUSTABLE SETTINGS ( the user can change these settings later on )
Setting
Default value
Range
Radio frequency
Operating TX frequency
438.000 MHz
Range: 403-473 MHz
Operating RX frequency
438.000 MHz
Range: 403-473 MHz
Reference Frequency
438.000 MHz
Range: 403-473 MHz
Channel Spacing
25 kHz
Range: 12.5 kHz or 25 kHz
Radio settings
TX Power
1000 mW
Range: 100, 200, 500 or 1000 mW
Signal threshold
-115 dBm
- 80 … -118 dBm
TX-Start Delay
0 ms
0-65535 ms
Radio Compatibility
SATELLINE 3AS
SATELLINE 3AS
PacCrest-4FSK
PacCrest-GMSK
TrimTalk450s(P)
TrimTalk450s(T)
PacCrest-FST
SATELLINE 2ASx
SATELLINE 3AS-1
SOUTH
SATEL 8FSK-1
SATEL 8FSK-2
SATEL 16FSK-1
Addressing
RX Address
OFF
ON/OFF
TX Address
OFF
ON/OFF
Serial port
Data speed
115200 bps
1200 – 115200 bps
Data bits
8
8
Parity bits
None
None, Even, Odd.
Stop bits
1
1
SATEL Compact-4BT User Guide
Version 1.8
19
Handshaking
Handshaking lines apply to the DATA-port.
CTS
TX buffer state
Clear to send, TX buffer state
CD
not supported
RSSI- threshold, Data on channel, Always ON.
RTS
Ignored
Ignored, Flow Control, Reception Control.
Pause length
3 bytes
3….255
Additional setup
Error correction, FEC
OFF
ON/OFF
Error check
OFF
OFF, CRC8Partial, CRC8Full, CRC16Full
Repeater Mode
OFF
ON/OFF
SL-commands
ON
ON/OFF
TX Delay
0
0 …. 65535 ms
Over-the-Air-Encryption
OFF
ON/OFF
Use Channel List
OFF
ON/OFF
Power Save Mode
OFF
ON/OFF
Add RSSI to Data
OFF
ON/OFF
SATEL Compact-4BT User Guide
Version 1.8
20
8.2 Configuration
The configuration of SATEL Compact-4BT radio modem can be modified by connecting the
modem to the PC and using SATEL Configuration Manager (CM). Programming is done using RS-
232 or USB port. The RS-232 serial port settings must match between SATEL Compact-4BT and
Configuration Manager. SATEL terminal program SaTerm supports also SATEL Compact-4BT
configuration.
8.2.1 Controlling the device with Configuration Manager
SATEL Configuration Manager (CM) is available also for SATELLINE-M3-TR1, -EASy, -EASy Pro,
-M3-R3, -M3-TR3, -M3-TR4, -M3-TR8, -EASy 869, -M3-TR1 869, Compact-Proof, and EASy-
Proof products. The program makes it possible to edit the modem settings and update the
firmware.
QuickStart
Preliminary settings:
1. Save the SATEL Configuration Manager,
SATEL_Configuration_Manager.help and the SatelNMS.ID
to the same directory. If available, save also the Firmware to
the same directory.
2. Connect the modem module to the PC using either YC0401
DC/USB or YC0400 DC/RS232 or Bluetooth.
3. Connect supply power to the module. Check that you have
the correct Supply Voltage.
4. Open the SATEL Configuration Manager program. Check from the “Program Preferences”
tab, that you have selected correct COM-port number and that the Baud rate is set to 9600
(when programming adapter is used, and according to the modem serial port data rate,
when the direct data cable is used.)
5. To establish connection between the modem and the PC, press the blue Connect tab. To get
the radio modem info, press blue Read Settings tab. Now all the information from the modem
is available.
6. Changed serial interface parameters are taken in use immediately.
For more information about Configuration Manager can be found from User Guide.
www.satel.com
SATEL Compact-4BT User Guide
Version 1.8
21
8.2.2 Controlling the device with SaTerm software
1. Start the "Satelline_Saterm.exe" software.
2. Click on the "New Terminal" button.
3. The "Serial Port Setup" window will appear. The settings should be as in the picture
below except Port number should be changed to correspond with the COM port in use.
Baud rate should be 115200, parity none, data bits 8 and stop bits 1. After settings
are in order, click "OK".
SATEL Compact-4BT User Guide
Version 1.8
22
4. Now a terminal window appears. This window shows all the commands to the
module and its responses. Any characters typed into the terminal will be transmitted
by the modem.
5. SL commands are transmitted via the "Transmit" window. Right click on the terminal
and a menu will appear. Select "Transmit".
SATEL Compact-4BT User Guide
Version 1.8
23
6. Type the desired command into the Transmit window and send it to the module by
clicking "Send". The module response will appear at the terminal.
In the example above, the module active frequencies are queried. The active RX and TX
frequencies are then shown at the terminal. To write commands the module should
reply "OK".
If settings are altered with SL commands the data must be stored to a non-volatile
memory as a last command “SL**>” .. Without the SL**> data is not stored and is
lost during the next power up.
8.2.3 Using a mobile application
SATEL Compact-4BT configuration can also be modified by Mobile application NETCO Mobile.
When mobile application is used a Bluetooth is needed for data transmission.
Mobile application can be downloaded from Android PLAY-shop with the name of “SATEL
NETCO Mobile”.
Once the application is installed, an icon is placed on a
home screen of the device.
SATEL Compact-4BT User Guide
Version 1.8
24
To be able to use SATEL Compact-4BT with Bluetooth it first should be paired with the user
device where SATEL NETCO is installed. The pairing is similar what other Bluetooth devices use
in general and in Android devices pairing is done through “Settings” “Bluetooth”.
Pairing is allowed only if the blue LED is blinking. After two minutes blue LED turns to red, now
only paired devices can connect. There is a memory of ten (10) most recent paired devices
which are sequentially replaced when new devices are paired.
When Bluetooth red LED is blinking and pairing is no longer possible, turn off the Bluetooth and
restart it by again pushing the Bluetooth button. This will start a new two minute period for
pairing.
Once the pairing is accomplished, using the application is very straightforward. Open the SATEL
NETCO Mobile application and search for nearby Bluetooth devices. Once the SATEL
Compact-4BT is found, simply connect to it.
1. Choose the connection style “Bluetooth”
2. Connect to a found device “CP-4BT”
3. Choose “Configuration” to change modem parameters.
SATEL Compact-4BT User Guide
Version 1.8
25
9 MECHANICAL DIMENSIONS
Figure 1.3 Mechanical dimensions
SATEL Compact-4BT User Guide
Version 1.8
26
10 ACCESSORIES
10.1 Data cable
SATEL Compact-4BT can be connected to a terminal device by two additional cables, YC0401
DC/USB and YC0400 DC/RS232.
YC0401 is intended for RS-232 serial transmission and YC0400 is intended for USB
transmission. Cables allow the interconnection to USB port or to RS-232 port by D-SUB 9pin
female connector. There is also on both cables a DC plug of 5.5 mm / 2.1 mm to the external
DC supply.
M12 cable connector has an alignment notch to position itself together with the connector on
the device. Do not turn the connector against the counterpart to find the alignment notch as this
might damage the connector. Find the correct position before trying to mate the connectors.
Once they mate, press the connector down and lock it by turning the knurled ring till the
connector is fully locked.
D-SUB9 has a securing screws which should be closed for reliable connection.
DC-plug does not have a locking mechanism and is based on a friction only.
Figure 1.4 Cable assemblies YC0401, YC0400 Figure 1.5 Alignment notch
SATEL Compact-4BT User Guide
Version 1.8
27
10.2 Mechanical attachments
SATEL Compact-4BT can be attached in multiple ways to, wall, tripod, pole or round objects by
selecting the right mechanical attachment method.
10.2.1 Rubber cover
Rubber cover (MD0037) can be used to minimize the handling impacts from all directions
creating a robust shield to resist, shock, vibration and drop. It also can hold a multipurpose
metal insert to function as a platform for screws, belts or straps (ME0532) and acts as a hook to
hang on to a tripod (ME0531).
Cover can be attached without tools just simply sliding it over the SATEL Compact-4BT by
pushing the top of the device first from the front side in to its position and then bottom should
follow. Some slight bending of the cover should be used to get the cover to its position.
Figure 1.6 Rubber cover
SATEL Compact-4BT User Guide
Version 1.8
28
10.2.2 Multipurpose attachment bracket
SATEL Compact-4BT can be attached to different locations by using metal brackets. These
multipurpose brackets should be combined with the rubber cover to become functional. Bracket
is first inserted to its position inside the rubber cover before its usage. Bracket B is specially used
for hooking setups for tripods or other similar positions. Bracket A is used for wall or
tree/mast/pole attachments using a strap. Bracket A and B are 2 mm thick, stainless steel.
Figure 1.7 Multipurpose brackets A (ME0532) and B (ME0531
Figure 1.8 Multipurpose bracket B dimensions
SATEL Compact-4BT User Guide
Version 1.8
29
10.2.3 Clamp attachment
SATEL Compact-4BT can be attached to a rigid object, like pole, with an adjustable clamp. The
clamp allows user to attach the device quickly and remove it for charging or for transportation.
The clamp is used with a multipurpose bracket B and the rubber cover with UNC 8#-32 x 3/8
screws (supplied with the clamp). Suitable diameter to clamp to can be between 18–40 mm.
Figure 2.0 Clamp mechanism.
Figure 2.1 Clamp attachment with a rubber cover.
SATEL Compact-4BT User Guide
Version 1.8
30
10.3 Power source
To connect the device to an external DC supply a power source of YP1240 AC adapter 40W
can be used. Any other power source do as well as long as it comply the voltage- and current
requirements given in this manual. Power supply DC jack is 5.5 mm / 2.1 mm. Inner pin is
positive. AC inlet connector is: (IEC 60320-2-2) type E (C14) male.
Figure 2.2 Power supply 240 AC / 12VDC
10.4 Car cigar lighter plug
Mobile charging can be carry out by a car cigar lighter plug cable. This allows SATEL Compact-
4BT to be charged from any vehicle having a socket for this universal plug. This cable has an
internal fuse protection. Car cigar lighter plug will be available soon, ask more from
manufacturer.
Figure 2.3 Car cigar lighter plug cable
SATEL Compact-4BT User Guide
Version 1.8
31
11 CUSTOMER SUPPORT AND FEEDBACK
In a case you need a support or have a question, you can contact us by an e-mail
info@satel.com or your local distributor https://www.satel.com/where-to-buy/
Follow us at https://www.satel.com, Facebook or LinkedIn for recent updates and news.
SATEL Oy
P.O. Box 142
FI-24101 Salo, Finland
Tel. +358 2 777 7800
info@satel.com
https://www.satel.com