SPAN® on FlexPak6
SPAN® on FlexPak6 Dual-Frequency + L-Band GNSS/INS Receiver
The compact SPAN on FlexPak6 receiver houses our SPAN on OEM628™ dual-frequency plus L-Band GNSS/INS receiver board. It tracks current constellations and future GNSS constellations ready, with a highly configurable interface to ensure positioning and integration needs are met now and into the future.
Features
- L1, L2 and L2C signal tracking (L5 ready)
- RT-2®, ALIGN®, API, and 100 Hz firmware options
- GPS + GLONASS (Galileo and Compass ready) and L-Band Tracking
Benefits
- Flexible communication interface broadens deployment options
- Multi-constellation tracking provides higher solution availability and reliability
- Upgradable receiver firmware ensures easy updating to future signals
- Supported by industry's highest level of customer service
Attributes
System Type
General Info
Constellation
Tracking
Number of Com Ports
Performance |
Accuracy | (RMS) |
| Single Point L1 | 1.5m |
| Single Point L1/L2 | 1.2m |
| SBAS | 0.6m |
| DGPS | 0.4m |
| NovAtel CORRECT™ |
| TERRASTAR-C | 4 cm |
| Veripos Apex | 6 cm |
| RT-2® | 1 cm + 1 ppm |
Easy In Integrate
The translucent design of the SPAN enabled FlexPak6 GNSS/INS receiver allows users to view internal status LEDs for easy diagnosis, while a wide input voltage range and an array of interface options including Ethernet, Serial, USB and CAN Bus permit quick and simple integration. The lightweight form factor makes it ideal for weight and power sensitive application.
Designed for Flexibility
Ethernet, CAN Bus and the traditional I/O signals (PPS, Event markers, VARF, PV, Error and Position Valid pins) are easily accessible via an optional HD15 pin breakout cable. With onboard NTRIP client and server support and enhanced connection options, this robust, versatile product is suited to rover or base applications.
Variants
| SPAN® on FlexPak6 | |
|---|---|
| Small, lightweight housing for our SPAN on OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range | |
| Image_Cached | |
System Type | |
| Enclosed | |
| GNSS/INS Enabled | |
General Info | |
| Length (mm) | 147.00 |
| Width/Diameter (mm) | 113.00 |
| Height (mm) | 45.00 |
| Weight (g) | 337.00 |
| Typical Power Consumption (W) | 1.80 |
Constellation | |
| GPS | |
| GLONASS | |
Tracking | |
| L-Band | |
| SBAS | |
| QZSS | |
Number of Com Ports | |
| CAN Bus | 1 |
| Ethernet | 1 |
| RS-232 | 2 |
| USB Device | 1 |
| Supports RS-422 (mode pin) | |
Supporting Products
Other product categories which are required with this product to create a complete system.
GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications
IMUs from leading manufacturers. Range of performance levels available
Alternate Products
Other similar products which could be used instead of the product, depending on application.
SPAN engine featuring GPS + GLONASS with AdVance® RTK performance and dedicated CPU; GLONASS and dual antenna options
End of Life Notice: For more information, click here
Dual-frequency plus L-Band GNSS/INS receiver board supports GPS, Galileo, GLONASS and Compass. Features our OEMV-2 form factor
End of Life Notice: For more information, click here
Our smallest form factor, GPS + GLONASS, dual-frequency GNSS/INS receiver board
End of Life Notice: For more information, click here
Optional Products
Optional products can be added to a system to add or enhance functionality.
Expands on the powerful features of GrafNav by adding support for loosely coupled and tightly coupled GNSS/INS processing