SATEL-LP9

The SATEL-LP product family is made for simple I/O and serial communications. SATEL-LP provides a cost-effective wireless solution to locations where it costs too much or it is impossible to run a wire. All SATEL-LP modules are DIN rail mountable. The communications over the air interface is secured with a 128-bit AES encryption and authentication.

 

SATEL-LP9 features

  • License-free 900 MHz
  • Designed for North America, South America and Canada
  • For short-range, non-line-of-sight applications or for long-range applications of up to 30 kilometers
  • Easy, software-free configuration
  • Up to 32 I/O modules can be attached to a single radio module via T-BUS
  • FHSS (Frequency Hopping Spread Spectrum)
  • License-free ISM (Industrial, Scientific and Medical) band
  • Mesh networks of up to 250 devices

 

For simple I/O and serial data transfer

The system consists of data transfer and expansion modules. The data transceiver modules are used for serial data transfer and expansion modules for I/O signals. I/O signals can also be connected directly to Modbus protocol devices with transceiver modules through RS-232 and RS-485 interfaces.

With SATEL-LP system it is easy and simple to create point-to-point, point-to-multipoint or large mesh networks up to 250 nodes. The commissioning can be done without any programming via the thumb wheel – a wireless connection is established automatically. Through AES encryption, frequency hopping spread spectrum, and coexistence management the system reliability is extremely high and data transfer is secured 24/7.

 

Available model and product code:

  • SATEL-LP9 (YM0409)

 

SATEL offers a wide range of accessories for the products, see here.

CONTACT US
Frequency range 902…928 MHz
Sensitivity/Carrier power -112 dBm / 1000 mW
Interface T-BUS ( for extension units ), RS-232, RS-485
Data speed Radio 500 kbps / RS 115.2 kbps
Operating voltage +10.8 … +30.5 Vdc
Power consumption 328 mA (@24 V DC)
Size/Weight WxHxD 35 mm x 99 mm x 114.5 mm / 327 g
Connectors RSMA(f) / screw connections (incl. DIN rail connector)